Polyester Fibre Tape

Our woven tapes find application in electrical industry for insulation purposes, in rotating machines, transformers and power cables.

The choice of our woven tape to be used for a particular job usually depends on the following:

• Temperature class : upto Class F-155⁰C, upto Class C-230⁰C + maximum short term temp upto 500⁰C
• Thickness : The allowable thickness of the tape in relation to the end use can be an important criterion. The nominal thickness measured between the selvedges, for woven tapes are usually from 0.09 mm. to 0.23 mm. Higher thickness are available upon request.
• Width of the tape : Depending on the end use, various widths from 5 mm. to 65 mm. can be used. The tolerance on width is + 10% mm. for nominal widths upto and including 25 mm. and + 1.5 mm. for nominal widths over 25 mm or upto 10% based on the requirement.
• Weave Density : No of ends in warp & weft direction per unit length signify weave density.
• Length of the tape : Standard 50 meters. However available as per customer requirement in other lengths also.
• Tensile Strength : This is an important criteria, since while winding, the tape should not tear off or dislocate and should have adequate tensile strength to withstand the Taping operation.

• Excellent di-electric properties
• Good chemical resistance.
• Good reinforcement to insulating varnishes
• Armoring against mechanical damage.